Skip to book content
Book Creator
Balloon powered car experiment
by Anja Hrain
Pages 2 and 3 of 7
STEAM UP
Balloon powered car
Loading...
Materials needed:
Loading...
Loading...
Loading...
First, we prepared all the necessary materials.
Loading...
Then we drilled two holes opposite each other with a screwdriver.
Loading...
We put a stick for skewers through the holes.
We added one cap to each end of the stick.
After putting the caps on each side, we checked the balance of our toy car.
We repeat the process and we drilled the holes on both sides and put one cap on each side.
We also checked the balance of our toy car again.
We stuck a straw and a balloon on the car with duct tape.
We started playing with our very own balloon (air) powered car. :)