Loading...
A HyperDuino HowToLoading...
by Dr. Nancy Smith and Aunt GoodiebagsLoading...
How to add an mp3 module to yourHyperDuino Project!
Loading...
Loading...
Loading...
This is a basic overview of how to set up the mp3 board.
You will need...
your computer
(to add the sound files to the micro SD card)
(to add the sound files to the micro SD card)
HyperDuino
an mp3 player module
a micro SD card and adapter
a speaker with plug
3 jump wires (pin to socket)
a GRAY Rainbow cable
a GRAY Rainbow cable
You can find these supplies on the Internet
(or in your collection of stuff!
-or-
You can also purchase an
"Audio Narration Add-on Kit"
from www.hyperduino.com
that
contains
all you will
need!
(or in your collection of stuff!
-or-
You can also purchase an
"Audio Narration Add-on Kit"
from www.hyperduino.com
that
contains
all you will
need!
a 9V battery with connector
Add sounds to the micro SD card
Insert the Micro SD card into the adapter.
Then insert the adapter into your computer.
There may be an SD slot on your computer
( or need to use an SD card adapter).
There may be an SD slot on your computer
( or need to use an SD card adapter).
On your computer...
Add up to 6 sound files into a folder on the SD card
Add up to 6 sound files into a folder on the SD card
Name the folder “01"
* Re-name the sound files “002Name" "003Name" etc.
* Re-name the sound files “002Name" "003Name" etc.
Eject the SD adapter and micro SD from your computer.
Remove the tiny SD card from the adapter.
Insert the tiny micro SD card into the mp3 module.
Remove the tiny SD card from the adapter.
Insert the tiny micro SD card into the mp3 module.
Attach the wires to the HyperDuino and mp3 module.
You will need 3 jump wires and a GRAY Rainbow cable.
Attach the jump wire SOCKETS to the mp3 module PINS...
like this...
mp3 module pins:
RX
TX --- EMPTY/no wire
VCC
GND
RX
TX --- EMPTY/no wire
VCC
GND
Attach the jump wire PINS
to the HyperDuino...
to the HyperDuino...
5V
GND
A0
sockets :
5V
GND
A0
This is a side view.
The sockets can be marked using masking tape labels.
The sockets can be marked using masking tape labels.